Payment & Shipping Terms:
|Printing:||Accept 3 Colors Pritning LOGO||Product Name:||High Tack Auto Carpet PE Protective Film For All Kind Of Cars|
|Processing Type:||Blow Molding||Feature:||Moisture Proof|
|Adhesive:||Solvent Based Acrylic Pressure Sensitive Adhesive (it Is Also Called Formulated Acrylic Proprietary Adhesive).||Total Thickness:||2mil (50micorns), 3mil (75micorns), 4mil (100microns).|
|Size:||As Required||Packing:||Roll In Carton Or Can Be Customized|
2mil Auto Carpet Protection Film,
2mil car carpet protector film,
PE Auto Carpet Protection Film
High Tack Auto Carpet PE Protective Film For All Kind Of Cars
Description High Tack Auto Carpet PE Protective Film For All Kind Of Cars
Auto carpet protection film is a multi-layer heavy duty ,easy application and removable polyethylene film with dealer must remove printing and perforation ,the perforation at certain distance makes it can be teared off by hand to square size suitable for vehicles easily .just protect vehicles from unwanted mud ,filth ,dust ,paint ,etc.
Auto carpet protection film is a fast, easy and effective way to protect a vehicle's carpeting from tracked in mud, oil, grease and moisture. This protective film comes in many different sizes.
Specifications of High Tack Auto Carpet PE Protective Film For All Kind Of Cars
1) Thickness: 0.02- 0.15mm
2) Width: 20 mm-1500mm
3) Length: 50m - 2,000m
4) Color: clear, blue, black and white, milk white (can be printed as order)
5) Backing: polyethylene film
6) Adhesive strength: 50-400g/50mm
7) Adhesive: acrylic or water-based resin adhesive
Usage: It can protect the metal surface not to be polluted, corrode, and scratch during the process of producing, transporting and store. It also can protect the surface of the metal surface existing bright and clean bright pool that can improve quality of the products and market competitiveness
Advantages: cover easily, peel easily, no vestige, no pollution
1. Adhesion: ›7.5N/25mm, 28oz/inch (793.8g/25mm normally).
2. Tack:10# Steel Ball
4. Tensile Strength: ›18MPa, 2000psi (13.79Mpa normally).
5. Elongation at break: ›350%, 400 %( normally).
6. Product shelf life is 18 months from date of manufacture under normal conditions of 70℉ and 50% relative humidity.
1.100% virgin raw material, high transparency.
2.High temperature resistance in short time, above 300% elongation rate and good elasticity.
3.Easy to be sticked and peeled off, teared of without residual on the protected surface.
4.Printing will not remain on the surface when peeling off.
5.The surface of the protective film is inert and not easy to react with chemicals.
Contact Person: sophie